We always offer a personal consultation to create your integrated packaging project together with our team of our graphic designers.
WATER-BASED PRINTING FOR LOWER ENVIRONMENTAL IMPACT
From 2021, we will begin a progressive and convinced path of abandoning production processes that use solvents, starting with printing. An ultra-modern central drum Bobst will be dedicated exclusively to the development and refinement of water-based inks, with the determined aim of reaching zero impact on the environment. For some time now, our energy needs have come from solar energy and, in the next few years, we intend to double the kilowatts from alternative sources.
OPTIMIZED PROCESS FOR WET WIPES AND CHEMICAL AND THERMAL RESISTANCE
Our state-of-the-art systems are periodically perfected to always face the most difficult challenges and create special applications. We produce resistant and safe laminates for high added value packaging.
SOLVENTLESS, WATER, SOLVENT LAMINATION
Our hybrid plants are able to vary production processes thanks to different technologies. For example, we can perform the coupling with or without the use of solvent or water. This latter solution can be used for the coupling of paper and film and allows, in the recycling phase, to easily separate the two layers of film. We can apply cold seal adhesives for the packaging of heat-perishable products (ice creams, snacks, etc.) and combine, with solvents, packaging intended for very challenging applications, such as single-dose food condiments, wet wipes and laminates intended for pasteurization or sterilization.
TACTILE PAINTS WITH MATT AND PAPER LOOK
We create tactile effects such as matte satin finishes in register print or paper look effect in register print. With this type of process, it is possible to enhance the packaging and increase its shelf appeal even with simple artwork with few colours.
FULL TRACKING AND CONTROLLED SUPPLIERS
Our modern 4.0 management systems allow a capillary control of the raw materials used. Suppliers are subjected to strict selection protocols, as required by ISO and BRC certifications.
CONSOLIDATED BRANDS PANTONE COLOURS MATCHED WITH MINIMUM DELTAE
Latest generation spectrophotometers allow colour control to ensure that the mixing of the pigments used for printing is always in DeltaE, a number conventionally used to indicate the degree of correspondence of a colour with its target.
100% QUALITY CONTROL OF THE PRINTING
We check the printing from the first to the last meter to ensure the best possible result of each packaging. Accurate linear cameras and powerful software are able to match the approved master with the rest of the production. Our 4.0 business monitoring system ensures the delivery of compliant and ready-to-use packs.
LOW POWER LASER FOR MICRO PERFORATION AND PEEL AND RESEAL LABELS
Micro-holes applied with controlled section, hidden inside the graphics, allow applications such as the packaging of fresh fruit or frozen foods to be heated in microwaves. The laser allows to create peel and reseal packages, with any opening profile, to engrave codes, traceability elements in register print on the packages. In all cases, we provide a "special" and customized reel, ready to use for the packer, who only has to carry out the sealing and filling of the package.
HIGH POWER LASER FOR MICRO-HOLES AND WINDOWS OF PACKAGES IN PAPER + FILM
With our modern systems, we can enhance the packs obtained by lamination, for example by coupling paper and plastic or paper and naturflex. We are able to create windows of any shape and in any position. The packer has to carry out only the heat-sealing of the bag and the filling as the reel will already have all the necessary pluses.
AUTOMATED FINISHING DEPARTMENT
Our cutting department is fully automated for the last production step before shipping. Traceability, safety and maximum productivity further raise the quality standards required by the BRC certification in order to meet the requirements of the most demanding markets, such as the pharmaceutical industry.
REALISATION OF FLAT BAGS, WITH SIDE BELLOWS AND DOYPACK
We are able to provide pre-formed bags for the packaging of products for food, beverage, pet food, cosmetics and pharma sectors, offering a wide range of structures both multi-material and mono-material, different shapes (standard, rounded corners and customized shapes) and various accessories (zips, valves, euro-holes, spouts, caps, resealable labels, etc.).
REALISATION OF SHRINK SLEEVES ON NARROW WEB WITH UV LED INKS
We make shrink sleeves starting from the study of the container on which to apply the label. We guide the customer in choosing the most suitable film to use based on the different shrink curves. Together with him, we evaluate the possible finishes that can be used based on the artwork and the deformation areas, from glossy and matt paints to cold foils. We can make tubulars with semi-perimeters (layflat) from 19 mm up to 600 mm, with thicknesses from 20 µm to 100 µm nd apply solvent to close the tubular with both needle and felt. We are able to apply longitudinal and / or transverse perforations for an easy opening or complete removal of the sleeve from the container.
REALISATION OF STRETCH SLEEVES
The manufacturing phases of the stretch sleeves are similar to those of the shrink sleeves: we proceed with the study of the application and the container for the choice of the most suitable materials, from the traditional to the most sophisticated, which allows them to be used even on the most elaborate shapes. We produce tubes from 60 mm to 435 mm in layflat on white or transparent supports. We can apply transversal pre-cuts, single-piece cuts and dies of any shape only in certain areas of the sleeve.
Flexible Packaging Plant
82018 Calvi (BN)
83028 Serino (AV)
SUBSCRIBE TO NEWSLETTER
Flexible Packaging Plant
Z.I. Cubante, 82018 Calvi (BN)
Z.I. Pescarole, 83028 Serino (AV)
Company | Solution | Sectors | Sustainability | Newsroom | Work with us | Contacts
SUBSCRIBE TO NEWSLETTER